Jelenlegi hely

UB-4000A - Lineáris egyenáramú ponthegesztési szabályozó beépített monitorral (korábban a DC29)

A UB-4000A lineáris egyenáramú ellenállás-hegesztési szabályozó 200–4000 Amp lineáris egyenáramú vezérlő négy visszajelzési móddal, amelyet úgy terveztek, hogy illeszkedjen az alkatrészek és folyamatok változóihoz. A hegesztési energia programozható áramerősségben, feszültségben, teljesítményben vagy V-A értékben, akár 0,01 milliszekundumos léptetéssel. Ezért ez a ponthegesztő ideális a kis alkalmazásokhoz az elektronikus alkatrészek és akkumulátorok piacán.

Specifikációk UB-4000A - Lineáris egyenáramú ponthegesztési szabályozó beépített monitorral

  • Négy vezérlési mód: áramerősség, feszültség, tápellátás és V-A (feszültség-áramerősség)
  • Egyfázisú bemenet
  • Kompakt méret
  • Kettős impulzusos ütemezések
  • Precízen vezérelt ismételhető hullámforma
  • Nagyon gyors emelkedési idő
Típus szám UB-500AUB-1500AUB-4000A
Névleges hálózati feszültség (egyfázisú) 88-264 VAC 47-63 Hz88-264 VAC 47-63 Hz 88-264 VAC 47-63 Hz
Ismétlési sebesség 500 A @ 3 weld/sec for 10 ms (per weld)1500 A @ 1 weld/sec for 10 ms (per weld)4000 A @ 1 weld/sec for 10 ms (per weld)
Beállítási tartományok: Áram 5A-500A 1 amp/step15A-1500A 1 amp/step200 A - 4000 A 10 amp/step
Beállítási tartományok: Feszültség 0.01 V - 9.9 V 10 mV/step0.1 V - 9.9 V 10 mV/step0.1 V - 9.9 V 10 mV/step
Beállítási tartományok: Teljesítmény 0.05 kW - 4.99 kW 10 Watt/step0.1 kW - 9.9kW 10 Watt/step0.1 kW - 25.0kW 10 Watt/step
Csúcsérték: Áram 500 A1500 A4000 A
Csúcsérték: Feszültség 10 V10 V10 V
Csúcsérték: Teljesítmény 4.9 kW9.9 kW25.0 kW
Kimenet szabályozás kontra hálózati feszültség ingadozás 2%2%2%
Kimenet szabályozás kontra ellenállás ingadozás 2%2%2%
Hegesztési ciklus időközök Ranges (ms)Resolution (steps)Ranges (ms)Resolution (steps)Ranges (ms)Resolution (steps)
Első / második impulzus, fel/lefutás és hűlési időközök 0 - 99.9.1(0-9.9), 1(10-99)0 - 99.9.1(0-9.9), 1(10-99)0 - 99.9.1(0-9.9), 1(10-99)
Squeeze/hold periods 0-99910-99910-9991
Kimeneti pontosság: Áram ±2% or 2.5 A±2% or 7 A±2% or 10 A
Kimeneti pontosság: Feszültség ±2% or 0.05 V±2% or 0.05 V±2% or 0.05 V
Kimeneti pontosság: Teljesítmény ±5% or 12 W±5% or 40 W±5% or 50 W
Jellemzők .
Hegesztési hő profil vezérlés UB-500AUB-1500AUB-4000A
Hegesztőimpulzus vezérlés Dial pulse with independent control of current, voltage or power on each pulseDial pulse with independent control of current, voltage or power on each pulseDial pulse with independent control of current, voltage or power on each pulse
Programozható hegesztőimpulzus szemgensek Squeeze, upslope 1, weld 1, downslope 1, cool, upslope 2, weld 2, downslope 2, holdSqueeze, upslope 1, weld 1, downslope 1, cool, upslope 2, weld 2, downslope 2, holdSqueeze, upslope 1, weld 1, downslope 1, cool, upslope 2, weld 2, downslope 2, hold
Hegesztés ütemterv memória Save up to 99 different weld schedules, protected from unauthorized changesSave up to 99 different weld schedules, protected from unauthorized changesSave up to 99 different weld schedules, protected from unauthorized changes
Weld schedule chaining Allows automatic linking of weld schedule sequenceAllows automatic linking of weld schedule sequenceAllows automatic linking of weld schedule sequence
Built-in weld monitor functions
Mérési paraméterek Current, voltage, power, resistance on each pulse.Current, voltage, power, resistance on each pulse.Current, voltage, power, resistance on each pulse.
Grafikus kijelző Back-lit LCD displays programmed and actual weld current, voltage, power, or resistance and upper and lower limitsBack-lit LCD displays programmed and actual weld current, voltage, power, or resistance and upper and lower limitsBack-lit LCD displays programmed and actual weld current, voltage, power, or resistance and upper and lower limits
Measurement selection Peak or averagePeak or averagePeak or average
Áram mérési tartomány / pontosság 0 – 500 A, ±2% of setting ±5 A0 – 1500 A, ±2% of setting ±10 A0 – 4000kA, ±2% of setting ±20 A
Feszültség méréstartomány / pontosság 0.1 – 9.9 V, ±2% of setting ±0.05 V0.01 – 9.9 V, ±2% of setting ±0.05 V0.01 – 9.9 V, ±2% of setting ±0.05 V
Teljesítmény méréstartomány / pontosság 0 – 4.9 kW, ±5% of setting ±10 W0 - 9.99 kV, ±2% of setting ±40 W0 – 25.0 kW, ±5% of setting ±50 W
Riasztások Display alert, five user programmable AC/DC relays; audio alarmDisplay alert, five user programmable AC/DC relays; audio alarmDisplay alert, five user programmable AC/DC relays; audio alarm
Programozható hegesztő energia határértékek Terminates weld energy when exceeding user defined current, voltage, or power limitsTerminates weld energy when exceeding user defined current, voltage, or power limitsTerminates weld energy when exceeding user defined current, voltage, or power limits
Hegesztés előtti ellenőrzés Inhibits second weld pulse when first test pulse exceeds user programmed limitsInhibits second weld pulse when first test pulse exceeds user programmed limitsInhibits second weld pulse when first test pulse exceeds user programmed limits
Aktív réz kondícionáló First pulse current limit in constant powerFirst pulse current limit in constant powerFirst pulse current limit in constant power
I/O és adatátvitel
Input: Input Isolation All inputs and outputs are fully isolatedAll inputs and outputs are fully isolatedAll inputs and outputs are fully isolated
Input: Control voltages +24V, sourcing or sinking inputs+24V, sourcing or sinking inputs+24V, sourcing or sinking inputs
Input: Foot switch initiation 1-level foot switch, 2-level foot switch1-level foot switch, 2-level foot switch1-level foot switch, 2-level foot switch
Input: Firing switch initiation Mechanical or opto firing switchMechanical or opto firing switchMechanical or opto firing switch
Input: Remote control Remote weld schedule select, process inhibit, emergency stop, alarm resetRemote weld schedule select, process inhibit, emergency stop, alarm resetRemote weld schedule select, process inhibit, emergency stop, alarm reset
Input: RS232 Change weld schedules and individual parametersChange weld schedules and individual parametersChange weld schedules and individual parameters
Input: Electrode voltage Weld voltage signal for voltage feedback operation (0 to 10V peak)Weld voltage signal for voltage feedback operation (0 to 10V peak)Weld voltage signal for voltage feedback operation (0 to 10V peak)
Output: Monitor RS232 weld data outRS232 weld data outRS232 weld data out
Output: Weld head air valve driver 24 VAC, 0.5 A; timing controlled by UB Series Power Supply24 VAC, 0.5 A; timing controlled by UB Series Power Supply24 VAC, 0.5 A; timing controlled by UB Series Power Supply
Output: Alarm relays Five user-programmable opto isolated relays; programmable normally open or normally closed contacts: 30 VDC at 0.5 A Conditions: weld, end of weld, alarm, out of limits, ready, weld counterFive user-programmable opto isolated relays; programmable normally open or normally closed contacts: 30 VDC at 0.5 A Conditions: weld, end of weld, alarm, out of limits, ready, weld counterFive user-programmable opto isolated relays; programmable normally open or normally closed contacts: 30 VDC at 0.5 A Conditions: weld, end of weld, alarm, out of limits, ready, weld counter
Méret (hossz x széles x magas) 381 mm x 213 mm x 305 mm (15 in x 8.4 in x 12 in )381 mm x 213 mm x 305 mm (15 in x 8.4 in x 12 in )381 mm x 213 mm x 305 mm (15 in x 8.4 in x 12 in )
Súly 22 kg (49 lb)22 kg (49 lb)22 kg (49 lb)
Battery tab to lithium ion cell
Halogen lamp filaments
Catheter guide wire assembly
Air bag detonator module (squib wire)

Testre szabott megoldások

Mintáját küldje be valamelyik európai technológiai központba kiértékelésre. Ennek alapján meghatározzuk, hogy melyik megoldás felel meg a legjobban az Ön igényeinek. Az AMADA WELD TECH felajánlja a megvalósíthatóság tesztelését, valamint az alkalmazással kapcsolatos tanácsadást is.

Kapcsolat