PA-H060A Pulsed Arc Power Supply (formerly known as PA-60P)
The PA-H060A Programmable Pulsed Arc Power Supply is a single output unit, commonly supplied for laboratory use or single torch volume manufacture in 60 amp output configuration. The unit also provides options for programmable gas shield control.
Typical pulsed micro arc welding applications include wire to pin terminations, stranded wire consolidation and wire to component joining.
Key Features PA-H060A Pulsed Arc Power Supply
- Colour Touch Screen with graphical weld tracing
- Constant Current Arc control to within 1% accuracy
- Single or Double Pulse outputs
- Simple to use, intuitive touch key menu.
- Compact, high performance and low cost
- Single phase 115VAC or 230VAC operation (PA-H020A, PA-H040A, PA-H060A)
- The 100 Amp unit is three phase 380 / 460VAC (PA-H100A, PA-H200A)
- One, two or four output variants with 20 to 200 amp outputs + options for gas control
Specifications PA-H060A Pulsed Arc Power Supply (formerly known as PA-60P)
Model | PA-H020A | PA-H040A | PA-H060A | PA-H100A | PA-H200A |
---|---|---|---|---|---|
Maximum Output Current | 20 Amps DC | 40 Amps DC | 60 Amps DC | 100 Amps DC | 200 Amps DC |
Duty cycle | 5% @ 20A | 5% @ 40A | 5% @ 60A | 5% @ 100A | 5% @ 200A |
Open circuit voltage | 80VDC | 60VDC | 60VDC | 45VDC | 45VDC |
Options | 1,2 or 4 outputs | 1 or 2 outputs | 1 output Multi output on request | 1 output Multi output on request | 1 output |
Mains supply 50/60Hz | 110V/230VAC +/-15% | 110V/230VAC +/-15% | 110V/230VAC +/-15% | 380 / 415 / 460VAC 3 phase | 380 / 415 / 460VAC 3 phase |
Up slope time (0.1 ms steps) | 0.1 - 99.9 ms | 0.1 - 99.9 ms | 0.1 - 99.9 ms | 0.1 - 99.9 ms | 0.1 - 99.9 ms |
Peak weld time (0.1 ms steps) | 0.1 - 999.9 ms | 0.1 - 999.9 ms | 0.1 - 999.9 ms | 0.1 - 999.9 ms | 0.1 - 999.9 ms |
Down slope time (0.1 ms steps) | 0.1 - 999.9 ms | 0.1 - 999.9 ms | 0.1 - 999.9 ms | 0.1 - 999.9 ms | 0.1 - 999.9 ms |
2nd pulse weld delay time | 1 - 999 ms | 1 - 999 ms | 1 - 999 ms | 1 - 999 ms | 1 - 999 ms |
Cooling (overheat protected) | Fan | Fan | Fan | Fan | Fan |
Max gas pressure | 1 Bar - Single Output | 1 Bar - Single Output | 1 Bar - Single Output | 1 Bar - Single Output | 1 Bar - Single Output |
Gas pre/purge timing | Programmable | Programmable | Programmable | Programmable | Programmable |
WEIGHT & DIMENSIONS | |||||
Dimensions (D x W x H) | 490 x 270 x 300mm | 490 x 270 x 300mm | 490 x 270 x 300mm | 445 x 560 x 220mm | 445 x 560 x 220mm |
Product applications PA-H060A Pulsed Arc Power Supply (formerly known as PA-60P)
Connector pin termination
Micro wire pin connections
Micro wire pin termination
Wire to component pin
Zero contact coil termination