You are here

PA-H060A Pulsed Arc Power Supply (formerly known as PA-60P)

The PA-H060A Programmable Pulsed Arc Power Supply is a single output unit, commonly supplied for laboratory use or single torch volume manufacture in 60 amp output configuration. The unit also provides options for programmable gas shield control.
Typical pulsed micro arc welding applications include wire to pin terminations, stranded wire consolidation and wire to component joining.

Key Features PA-H060A Pulsed Arc Power Supply

  •  Colour Touch Screen with graphical weld tracing
  • Constant Current Arc control to within 1% accuracy
  • Single or Double Pulse outputs
  • Simple to use, intuitive touch key menu.
  • Compact, high performance and low cost
  • Single phase 115VAC or 230VAC operation (PA-H020A, PA-H040A, PA-H060A)
  • The 100 Amp unit is three phase 380 / 460VAC (PA-H100A, PA-H200A)
  • One, two or four output variants with 20 to 200 amp outputs + options for gas control
Model PA-H020APA-H040APA-H060APA-H100APA-H200A
Maximum Output Current 20 Amps DC40 Amps DC60 Amps DC100 Amps DC200 Amps DC
Duty cycle 5% @ 20A5% @ 40A5% @ 60A5% @ 100A5% @ 200A
Open circuit voltage 80VDC60VDC60VDC45VDC45VDC
Options 1,2 or 4 outputs1 or 2 outputs1 output Multi output on request1 output Multi output on request1 output
Mains supply 50/60Hz 110V/230VAC +/-15%110V/230VAC +/-15%110V/230VAC +/-15%380 / 415 / 460VAC 3 phase380 / 415 / 460VAC 3 phase
Up slope time (0.1 ms steps) 0.1 - 99.9 ms0.1 - 99.9 ms0.1 - 99.9 ms0.1 - 99.9 ms0.1 - 99.9 ms
Peak weld time (0.1 ms steps) 0.1 - 999.9 ms0.1 - 999.9 ms0.1 - 999.9 ms0.1 - 999.9 ms0.1 - 999.9 ms
Down slope time (0.1 ms steps) 0.1 - 999.9 ms0.1 - 999.9 ms0.1 - 999.9 ms0.1 - 999.9 ms0.1 - 999.9 ms
2nd pulse weld delay time 1 - 999 ms1 - 999 ms1 - 999 ms1 - 999 ms1 - 999 ms
Cooling (overheat protected) FanFanFanFanFan
Max gas pressure 1 Bar - Single Output1 Bar - Single Output1 Bar - Single Output1 Bar - Single Output1 Bar - Single Output
Gas pre/purge timing ProgrammableProgrammableProgrammableProgrammableProgrammable
WEIGHT & DIMENSIONS
Dimensions (D x W x H) 490 x 270 x 300mm490 x 270 x 300mm490 x 270 x 300mm445 x 560 x 220mm445 x 560 x 220mm
Connector pin termination
Micro wire pin connections
Micro wire pin termination
Wire to component pin
Zero contact coil termination

Customized Solutions

Send your sample to one of our technology centers in Europe for an evaluation. We will then determine which solution meets your needs best. AMADA WELD TECH offers feasibility testing and application consulting.

Contact